PC Building Simulator update out now on Switch (version 1.4.0), patch notes

Posted on July 16, 2022 by Brian(@NE_Brian) in News, Switch eShop

PC Building Simulator was recently given a new update on Switch, with version 1.4.0 going out.

A significant amount of content has been added, and The Irregular Corporation is calling this an IT Expansion. It includes over 20 hours of additional story content, a new in-game tablet feature, new environments, an increased number of job types, and the ‘Tikkit’ job system. New parts have been added, and there are tons of bug fixes.

The full patch notes for the PC Building Simulator version 1.4.0 update are as follows:

Free Content: PC Building Simulator IT Expansion
After much adjusting and optimization, it’s time to step out of the workshop and into another workshop embracing Uncle Tim’s latest opportunity.
You join the ranks of the last bastion of sanity, IT support, stepping into a new role at the Irratech Corporation. Featuring over 20 hours of additional story content, a new in-game tablet feature, fresh environments, an increased number of job types and the ‘Tikkit’ job system.
Full Parts List:
Motherboards:
GIGABYTE Z590 AORUS XTREME WATERFORCE
GIGABYTE Z590 AORUS ULTRA
GIGABYTE Z590I VISION D
GIGABYTE Z590 VISION G
GIGABYTE Z490 AORUS XTREME WATERFORCE
GIGABYTE Z490 AORUS XTREME
NZXT N7 B550
NZXT N7 Z590
Cases:
ADATA XPG DEFENDER PRO
Cooler Master MasterFrame 700 (Showcase Mode)
Cooler Master MasterFrame 700 (Bench Mode)
Cooler Master Silencio S400
Cooler Master Silencio S600
InWin 925
Fractal Design Define 7 Compact Tempered Glass Black/White versions
Case Fans:
Cooler Master Silencio FP 120 PWM
Fractal Design Dynamic X2 GP-12 (White)
XPG VENTO 120
Water Cooled GPUs:
ZOTAC GAMING GeForce RTX 3090 ArcticStorm
GPUs:
ASRock Radeon RX 6900 XT Phantom Gaming D 16G OC
ASRock Radeon RX 6800 Phantom Gaming D 16G OC
ASRock Radeon RX 6800 XT Phantom Gaming D 16G OC
ASRock Radeon RX 6800 XT Taichi X 16G OC
ASRock Radeon RX 6700 XT Phantom Gaming D 12GB OC
Colorful iGame GeForce RTX 3070 Ultra W OC-V
MSI GeForce RTX 2080 SUPER™ AERO
ZOTAC GAMING GeForce RTX 3080 Ti Trinity OC
ZOTAC GAMING GeForce RTX 3080 Trinity OC White Edition
ZOTAC GAMING GeForce RTX 3070 Twin Edge OC
ZOTAC GAMING GeForce RTX 3070 Twin Edge OC White Edition
Memory:
Colorful iGame Vulcan DDR4 4266MHz 8GB
Colorful iGame Vulcan DDR4 3600MHz 8GB
Colorful CVN Guardian DDR4 3200MHz 16GB
Colorful CVN Guardian DDR4 3200MHz 8GB
Colorful CVN Guardian DDR4 2666MHz 8GB
Monitors:
ACER Predator XB273UGS
ACER Predator XB253Q
ACER Predator XB273GX
Bug Fixes:
Parts:
Fixed an issue which prevented the Corsair RTX 3080 hydro X XG7 STRIX RGB from correctly connecting to other water cooling components in the Lian Li O11D XL-X case.
Adjusted cable routing inside the FSP CMT340 case to appear more natural.
Adjusted cable routing inside the be quiet! Silent Base 801 case to appear more natural.
Adjusted cable routing inside the NZXT H440 to appear more natural.
Adjusted cable routing inside the Raijintek Asterion Plus case to appear more natural.
Adjusted cable routing inside the GamerStorm Genome ROG Certified Edition case to appear more natural.
Adjusted PSU cable routing to prevent clipping with the PC’s motherboard tray in Cooler Master MasterBox5 PC case.
Adjusted the case fan cable routing to prevent clipping when paired with the MSI MPG Z490 Gaming Carbon Wifi motherboard.
Custom water cooling pipes will now correctly respect the ADATA XPG Battlecruiser case boundaries.
Players will no longer be able to remove the drive bay before removing drives which are installed in the be quiet! Dark Base Pro 900 rev. 2 case.
Players will no longer be able to remove the drive bay before removing drives which are installed in the SilverStone LD03 case.
Players will no longer be able to remove the drive bay before removing drives which are installed in the Fractal Design Meshify 2 and Define 7 cases.
Corrected the placement of front panel 120mm fan slots to prevent overlapping in the Fractal Design Define 7 XL case.
Fixed an issue which caused ASRock Z390 Taichi open drive bays to clip with wider GPUs.
Players can no longer install USB Drives through the top panel of the SilverStone FT05 case.
Fixed an issue which led to non/semi-modular PSU cables clipping through drive bays in the SilverStone FT05 case.
Adjusted the routing of SATA cables between hard drives and the motherboard in the be quiet! Pure Base 600 case to prevent clipping.
Fixed an issue which caused hard drives to clip with some drive bays in the CORSAIR Crystal Series 280X RGB case.
Corrected the alignment of the SilverStone TD01-SLIM and TD02-SLIM AIOs to accurately match CPU sockets.
Fixed an issue which led to text overflow when powering on the ASUS ROG SWIFT PG27QU monitor.
Adjusted the placement of a number of AIO’s to prevent clipping with the drive bay locks of the SilverStone PM01-RGB case.
Adjusted the placement of a number of AIO’s to prevent clipping with the beauty panel of the SilverStone PM01-RGB case.
Players will no longer be able to install M.2 Drives through the GPU on the GIGABYTE GA-AB350M-Gaming 3 motherboard
Fixed the placement of the Deepcool RF 120 case fans to prevent clipping with dust filters and the top panel of the Lian Li O11 Dynamic case.
Fixed an issue which caused clipping of cables and certain motherboards in the In Win 309 case.
Corrected collision to prevent custom water cooling pipes from being placed in areas which clip the VRM heatsinks on the MSI MEG X570 Godlike motherboard.
Corrected collision to prevent custom water cooling pipes from being placed in areas which clip the side panel of the CORSAIR Obsidian Series 1000D case.
Fixed an issue which prevented fans from being installed in the second slot on the front panel of the be quiet! Silent Base 600 case.
Adjusted collision to more intuitively allow drives to be installed in the NZXT H500 case if a GPU is already installed.
Corrected placement of some PSUs which were clipping with mounts in the NZXT H440 case.
Players will now need to remove the CPU shield before installing a CPU in the MSI MPG Z590 CARBON EK X motherboard.
Removed an extra screw which was incorrectly present on several motherboards.
Corrected the price of DFL Tohu mousepads in the Peripheral Shop.
Adjusted the placement of the PCIe 8-Pin power cable to more accurately plug into the ZOTAC GAMING GeForce RTX 2080 Ti Amp MAXX GPU.
Adjusted collision to more intuitively prevent conflicts between GPU and water cooling pipes in a Lian Li O11D XL-W case.
Fixed an issue which allowed players to install PSUs with no physical supports in the Cooler Master COSMOS C700P case.
Players can now remove multibrackets from the Fractal Design Meshify 2 and Define 7 cases without first having to remove the beauty panel.
Adjusted cable routing to more accurately match drives which are installed in non-standard slots via multibrackets in the Fractal Design Meshify 2 and Define 7 cases.
Fixed collision to allow more case fans to be installed in the bottom of several newer Fractal Design cases.
Fixed collision to prevent case fan cables clipping with the case chassis in several of the newer Fractal Design cases.
The ADATA XPG SPECTRIX S40G M.2 drive will no longer cause clipping issues with the GIGABYTE X570 AORUS ULTRA (rev 1.0) M.2 shields.
Corrected case fan cable routing to prevent clipping occurs between the cable and additional case fans in the CORSAIR Carbide Series 275R case.
Fixed an issue which caused the Raijintek PALLAS 120 CPU cooler to clip with the SilverStone RVZ03 case.
Adjusted the PSU cable routing to prevent cables clipping with the back panel in Raijintek METIS Red case.
Several AIO power cables have been adjusted to reduce the instances of them clipping through installed memory or preventing installation by flagging clipping issues with installed memory.
Adjusted the routing of case fan cables to prevent clipping with the SilverStone PS14 case.
Fixed the placement of the CORSAIR XD3 RGB Combo to prevent clipping with the back of CORSAIR Crystal Series 280X RGB case.
Fixed an issue which prevented some single-fan AIO’s from being installed inside the Silverstone PS14 PC case.
Corrected the label Z index of several EVGA PSUs to prevent it from appearing partially obscured by the PSU’s side panel.
Corrected the label Z index of several EVGA SuperNOVA PSUs to prevent it from appearing partially obscured by the PSU’s side panel.
The CPU block flow indicator of the EKWB EK-WB Custom CPU Block on the MSI MPG Z590 Carbon EK X motherboard now correctly spins when attached to a working custom cooling loop.
The EKWB EK-WB custom CPU block will no longer incorrectly clip with the MSI MPG Z590 Carbon EK X motherboard IO Shields and VRM heatsinks.
Career:
Adjusted the reservoir to prevent clipping with the side panel in the PC during the “Fix for PC” job given by [email protected].
The “fix” job given by [email protected] no longer shows the “Replace CPU Block” objective twice.
Players can now correctly hand in the “Fix for PC” job given by [email protected].
Fixed an issue which led players to incorrectly be charged for existing components in the “FIX NEEDED!” job given by [email protected].
Fixed a number of events which caused randomly generated jobs to ask for players to reach unattainable GPU core clocks.
Fixed a number of events which caused randomly generated jobs requiring dual graphics cards to spawn with a case which is too small for them.
Workshops:
Adjusted the lighting on the first workbench in the default workshop to prevent visual anomalies when working with white PC parts and cases.
Fixed an issue which led to the camera clipping through the bottom of the workbench while in assembly mode in the ROG Workshop DLC.
Significantly increased the fidelity of the Razer logo on the exit door of the Razer Workshop DLC.
Adjusted the cables of several monitors to prevent clipping with the monitor’s stands across all workshops.
Users will no longer be able to interact with PCs through walls and benches in several workshops.
Fixed an issue which led to abnormally high GPU usage when inside the AORUS Workshop DLC.
Miscellaneous:
Several NZXT coolers have been adjusted to ensure legibility of the brand logo from the inventory screen.
The ZOTAC GeForce GTX 1080 Ti Mini GPU will no longer incorrectly show when filtering for the “RTX 2000 Chipset series”.
Adjusted post-it notes highlighting system to prevent highlights showing through hard surfaces in several workshops.
Increased the update rate of the rating on the HUD to better show the impact of quitting jobs.
Fixed an issue which led to Bongle reviews generating dates with incomplete years.
Adjusted the cursor aim assist function to support the Cloud Notes app when opened from the inventory window.
Fixed a performance issue which occurred when handling the PC for the “a lil request…” contract.
Added an exception to random job generation to prevent jobs from generating with the SilverStone PM01-RGB case “Drive Bay Lock” closed and causing the CPU/case fans to become stuck.

All players on Switch can download the new 1.4.0 update and IT Expansion for PC Building Simulator now.

Source